Christian Haudum

Stream configuration problem with Airtime 2.2
After spending a day on this issue I could resolve it :) The problem was that the airtime-liquidsoap failed to restart, but there were no errors in the logs nor any other indication (not even in the system status in the web interface). In /etc/…

Comment by Christian Haudum November 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
After spending a day on this issue I could resolve it :) The problem was that the airtime-liquidsoap failed to restart, but there were no errors in the logs nor any other indication (not even in the system status in the web interface). In /etc/ini…

Comment by Christian Haudum November 2012 permalink
Stream configuration problem with Airtime 2.2
To show that trying to connect to a Shoutcast server with Icecast protocol throws that error, you can use the airtime-test-stream utility: xxx@xxx:~$ airtime-test-stream -o icecast -P 8000 -m livestream -p xxxxxx Protocol: icecast Host: localhost…

Comment by Christian Haudum November 2012 permalink
Stream configuration problem with Airtime 2.2
I'm pretty sure it uses an old Icecast configuration, because when I try to connect with a client using Icecast protocol, I get the same error.

Comment by Christian Haudum November 2012 permalink
Stream configuration problem with Airtime 2.2
It is empty actually, but it seems that Liquidsoap is not using an updated configuration. It is still using some old Icecast configuration?! It should not even matter if the mountpoint is empty if you are using ShoutCast, because the Liquidsoap scr…

Comment by Christian Haudum November 2012 permalink
Stream configuration problem with Airtime 2.2
Just realized there is the same problem with Icecast :( Looked at the logs: 2012/11/04 17:22:24 [airtime_128:3] Connecting mount airtime_128 for source@127.0.0.1... 2012/11/04 17:22:24 [airtime_128:2] Connection failed: bad answer: scanf: bad inpu…

Comment by Christian Haudum November 2012 permalink
Stream configuration problem with Airtime 2.2
If a show is scheduled then from time to time the ON AIR signal appears for a second or so, but actually nothing happens.

Comment by Christian Haudum November 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
@Martin Everything works fine now. Thanks a lot for your help! The server load is quite high now - constantly around 2.0 - where liquidsoap is using most of the cpu time. Is that normal?

Comment by Christian Haudum March 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
Hey, thanks for your help so far! Really helped me forward. Not to my knowledge. It's a virtual root server with squeeze pre-installed. Indeed it is very strange. I also could not find anything on the internet, only a bug in the nice command …

Comment by Christian Haudum March 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
Yes, it's 0.

Comment by Christian Haudum March 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
root@xxx:~# service airtime-playout restart Restarting Airtime Playout: start-stop-daemon: unable to alter nice level by -15 (Operation not permitted) Done.

Comment by Christian Haudum March 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
I realized that as soon as I ran this script (in foreground) I could connect to the streaming server in the web admin, the status indication of airtime-liquidsoap is still red.

Comment by Christian Haudum March 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
root@dubbase:~# sudo -u pypo /usr/lib/airtime/pypo/bin/airtime-liquidsoap sudo: unable to resolve host dubbase 2012/03/12 21:23:47 >>> LOG START 2012/03/12 21:23:46 [protocols.external:3] Didn't find "ufetch". 2012/03/12 21:2…

Comment by Christian Haudum March 2012 permalink
Problem with liquidsoap (Airtime 2.0.2)
No, I can run liquidsoap as long as I want in the foreground, but I cannot run it in the background with the init script /etc/init.d/liquidsoap That's why (I guess) Airtime states the service as not working. But I just realised that liquidsoa…

Comment by Christian Haudum March 2012 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Follow Christian Haudum

About

Username: Christian Haudum
Joined: March 2012
Visits: 0
Last Active: November 2012
Roles: Member
Posts: 16

Friends

My Badges

Total Points: 70

Christian Haudum

Howdy, Stranger!

About

Friends

My Badges

Top Posters